Maxima (A32) 95-99 ************************************************* Maxima (A32) 95-99 > BF - BODY & FRAME ************************************************* SB - Diagnosing Water Leaks (NTB93075 ) SB Timing The Removal Of Paint Guard Film [NTB94-042] SB 1995 240SX & Maxima; Paint Codes And Clear Coat (NCLC) Identification [NTB94053] SB New Cross-Linking Clear Coat (NCLC) Polishing Procedure [NTB94061] SB Removal Of Paint Guard Film Adhesive Residue [ NTB94071] [NTB94078] - Paint Guard Film Removal Timing [NTB94093] - 1995 Maxima; Rear Window Rubber Molding Replacement Procedure [NTB94121] - Windshield Cracking [TS87064] - Isopropyl Alcohol Caution All models ----------------------------------------------------------------- NTB93075 - Overview: Basic procedures for detecting water leaks are explained in this bulletin. ----------------------------------------------------------------- NTB94042 - This bulletin was replaced by NTB99060. (Formerly: "Depending on the model or paint type, Paint Guard Film (PGM) must be removed within 3 or 6 months of the vehicle manufacturing date. ") ----------------------------------------------------------------- NTB94053 - Some vehicles will be produced with conventional clear coat paints; others will be finished with new cross link clear coat (nclc), & are identified by a label on the front shock tower. ----------------------------------------------------------------- NTB94061 This amended version of NTB94-015 updates information in the polishing procedure. Please discard NTB94015 (NTB94-015). If it is necessary to remove fine scratches (swirl marks, buff/polish marks) for vehicles with New Cross-Linking Clear Coat (NCLC/hard clear coat) paint, use the recommended equipment and materials and follow the revised Service Procedure. ----------------------------------------------------------------- NTB94071 SB Removal Of Paint Guard Film Adhesive Residue [ NTB94071] In some cases, thin lines of adhesive residue may be left on the painted body surfaces of vehicles after removing the paint guard film. To optimize new vehicle presentation, it is important to remove this residue prior to customer delivery. DOWNLOAD/DISPLAY TSB ----------------------------------------------------------------- [NTB94078] - Paint Guard Film Removal Timing This bulletin amends NTB94-042 with updated PGF removal timing information for selected white (paint color code: 326 and 531) Japan built models. DOWNLOAD/DISPLAY TSB ----------------------------------------------------------------- [NTB94093] - 1995 Maxima; Rear Window Rubber Molding Replacement Procedure The rear window rubber molding of the 1995 Maxima has been designed to be replaceable without removing the back glass. If molding replacement is required please use the procedure in this bulletin. DOWNLOAD/DISPLAY TSB ----------------------------------------------------------------- [NTB94121] - Windshield Cracking The purpose of the bulletin is to give Nissan dealers guidelines to help determine if windshield breakage is covered under warranty or is the customer's responsibility ----------------------------------------------------------------- [TS87064] - Isopropyl Alcohol Caution All models Isopropyl alcohol solution used for general cleaning and for preparing the vehicle surface for graphics installation will cause the plastic lenses on turn signal lights, side marker lights, cornering lights, tail lights, etc., to crack ----------------------------------------------------------------- ************************************************* Maxima (A32) 95-99 > BR - BRAKE SYSTEM ************************************************* [NTB00033] - Nissan; Brake Noise/Judder/Pedal Feel Diagnosis And Repair [NTB04094] - Nissan; On-Car Brake Rotor Resurfacing [NTB95046] - 1995 Maxima; Rear Brake Rattle Noise [NTB96015] - 1995-96 Maxima; Brake Squeak/Squeal Noise When Cold SB 1995-97 Maxima; Parking Brake Cable Damage SB 1995-98 Maxima; rattle noise from power brake check valve SB 1995-99 Maxima; Rear Brake Squeak/Squeal Noise When Cold SB Key Value Brake Pad Service Information SB 1995-99 Maxima; Rear Brake Groan/Humming Noise After Releasing Brake Peda SB 1995-99 Maxima; Front Brake Groan Noise During Stopping SB Nissan; ABS Sensor Caution When Using On-Car Brake Lathe ----------------------------------------------------------------- [NTB-00-033] - Nissan; Brake Noise/Judder/Pedal Feel Diagnosis And Repair SERVICE INFORMATION This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. Most brake incidents fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel, or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. Verify the condition by road testing the vehicle with the customer. 2. Determine the specific brake incident based on the description in the Service Information above. 3. Follow the appropriate repair procedure(s), listed on the following pages, for your specific incident. See this bulletin for further details. ----------------------------------------------------------------- [NTB-04-094] - Nissan; On-Car Brake Rotor Resurfacing If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear), ACTION: Use the ProCut™ PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin ----------------------------------------------------------------- [NTB-95-046] - 1995 Maxima; Rear Brake Rattle Noise Some customers may complain of hearing a rattle noise coming from the rear of the vehicle when driving over bumps or rough roads. If the noise can be reduced or eliminated by a slight application of the parking brake while driving over the road where the noises are produced, the countermeasure kit described in this bullein will reduce this incident. ----------------------------------------------------------------- [NTB-96-015] - Brake squeak or squeal during the first few applications when the pads or cold. - For front brakes on vehicles built before 7/28/95 - For rear brakes on vehicles built before 8/30/95 See this bulletin for countermeasure information. Classification: BR96-001 ----------------------------------------------------------------- ----------------------------------------------------------------- ----------------------------------------------------------------- ----------------------------------------------------------------- ----------------------------------------------------------------- ----------------------------------------------------------------- ----------------------------------------------------------------- ----------------------------------------------------------------- ----------------------------------------------------------------- ----------------------------------------------------------------- ----------------------------------------------------------------- ----------------------------------------------------------------- ----------------------------------------------------------------- ----------------------------------------------------------------- ----------------------------------------------------------------- ----------------------------------------------------------------- -----------------------------------------------------------------